Product Overview


EMS Schema

PRiOT Energy Manager

A wide variety of consumers can be integrated via all available interfaces of the PRiOT Energy Manager. In addition, the Energy Manager offers a large number of compatible energy meters (Electricity, warmth & water) and is simple and intuitive to install.

Power Supply: power supply unit
Data Transfer: LAN
Measuring and transmission frequency: adjustable

Use of the Energy Management System

Brunnen mit Pegelsonde

PRiOT Level Probe

The PRiOT level probe measures the fill level using pressure changes. It is used in tanks, wells, groundwater and other liquids. The battery-powered measuring device is independent of an external power supply and can therefore be installed anywhere.

Power Supply: 2x AA Alkaline Batteries
Battery Lifetime: up to 10 years
Data Transfer: LTE-Cat-M1 / NB-IoT / LoRaWAN
Measuring and transmission frequency: adjustable
Parameters: environment temperature, humidity, liquid level, liquid temperature

Use of the level monitoring

Leckagesensor in Keller

PRiOT Leakage Sensor

The PRiOT Leakage Sensor immediately detects and reports water ingress into a room. The battery-powered measuring device does not require an external power supply and can therefore be installed anywhere.

Power Supply: 2x AA Alkaline Batteries
Battery Lifetime: up to 10 years
Data Transfer: LTE-Cat-M1 / NB-IoT / LoRaWAN
Measuring and transmission frequency: adjustable
Parameters: leakage, environment temperature, humidity

Use of the leak detection

PRiOT FiMo Messgerät

PRiOT Filtermonitor

The PRiOT-FiMo is a battery-powered filter monitoring device for ventilation systems
that measures room temperature, room humidity and filter back pressure and transmits the data to the PRiOT platform via LoRaWAN. It can be installed easily, quickly and cost-effectively at the point of use.


Power Supply: 2x AA Alkaline Batteries
Battery Lifetime: up to 10 years
Data Transfer: LoRaWAN
Measuring and transmission frequency: adjustable
Parameters: temperature, humidity, pressure difference

Use of the filter monitoring

PRiOT KiMo Messgerät

PRiOT Climate Monitor

The PRiOT-KiMo is battery-powered and transmits data wirelessly, either via LoRaWAN or LTE. It can be installed quickly and easily at the point of use. The device measures and transmits the ambient temperature and relative humidity cyclically.

Power Supply: 2x AA Alkaline Batteries
Battery Lifetime: up to 10 years
Data Transfer: LoRaWAN / NB-IoT / LTE-Cat-M1
Measuring and transmission frequency: adjustable
Parameters: temperature, humidity, (optional: fine particles)

Use of the climate surveillance

PRiOT GPS-Tracker

PRiOT GPS-Tracker

The PRiOT GPS-Tracker is installed directly in the vehicle and powered by the on-board system. Its position is determined in real time via GNSS (GPS). It can also be used to monitor battery voltage and display speed and acceleration. The routes travelled are recorded in the system.

Power Supply: 10-30 Volt DC
Data Transfer: NB-IoT / LTE-Cat-M1
Measuring and transmission frequency: adjustable
Parameters: GNSS (GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS)
Accuracy: <3m

Use of the vehicle localisation

PRiOT DaMo Skizze visualisiert

PRiOT Rooftop Monitor

The PRiOT-DaMo is a battery-powered monitoring device for flat roofs and balconies that continuously records temperature, humidity and water levels and reliably detects leaks. The data is transmitted wirelessly. The device can be installed in new and existing buildings with minimal effort.

Power Supply: 2x AA Alkaline Batteries
Battery Lifetime: up to 10 years
Data Transfer: LoRaWAN / NB-IoT / LTE-Cat-M1
Measuring and transmission frequency: adjustable
Parameters: temperature, humidity, leakage

Use of the rooftop monitoring

Address

Kirchbergstrasse 190
3400 Burgdorf

Contact

E-Mail: info@priot.ch
Tel: +41 34 402 62 21

Offline Website Builder